Nickel is a silver-white metal with magnetic properties and good plasticity. It has good ductility, medium hardness and mechanical strength, and is insoluble in high temperature. It is widely used in military manufacturing industries such as airplanes, tanks and ships. Used in the civil industry for the manufacture of structural steel, acid-resistant steel, structural steel, etc.

• Density 8.902 g / cm3 [2]
• Melting point 1453 ° C [2]
• Boiling point 2732 ° C [2]

Nickel alloy 718

Nickel 718, or Inconel 718 is a hardening nickel-chromium alloy that contains molybdenum, FE, columbium, and smaller traces of aluminum and titanium. Designed to exhibit significant yields, high strength, good ductility, and creep rupture properties up to 1300°F (704°C). These characteristics provide alloy 718 good formability, weldability, and cryogenic allowances compared to the metals other nickel based superalloys. The sluggish age hardening characteristics in alloy 718 also allow annealing and welding without the occurrence of spontaneous hardening during heating and cooling. This alloy is also non-magnetic, maintains significant corrosion and oxidation resistances

	Ni+Co	Cr	Cb+Ta	Mo	Ti	Al	Co	C	Mn	Si	P	S	B	Cu	Fe
MIN	50.00	17.00	4.75	2.80	0.65	0.20	-	-	-	-	-	-	-	-	-
MAX	55.00	21.00	5.50	3.30	1.15	0.80	1.00	0.08	0.35	0.35	0.015	0.015	0.006	0.30	Balance

Speificaton : ASTM B637, B670, AMS 5596, 5662, 5663, 5832

Application :

• Gas turbine engine parts
• Liquid fuel rocket motor components
• Springs, fasteners
• Cryogenic tanks
• Pumps and valves
• Chemical Equipment

Nickel Alloy C-276

Hastelloy C-276/Alloy C276, with a high nickel contents, is immune to chloride-induced stress corrosion cracking. The high molybdenum and chromium contents allow the alloy to perform in oxidising, non-oxidising and mixed acids media, whilst exhibiting outstanding resistance to pitting and crevice corrosion attack. The addition of tungsten inhibits the development of pits. Finally, C276 is suitable for off-shore applications where hydrogen-sulphide(H2S) stress corrosion cracking resistance is essential.

Industries where C276 is utilised are petrochemical and chemical processing, power generation, pharmaceutical, pulp and paper production and waste treatment to name a few.

Specification :ASTM B564/B574/B575/B462/B775

Application :

• Pressure Vessels
• Reactors & Condenser
• Mixers and Agitators
• Scrubbers
• Dampers
• Heat Exchangers
• Venturis
• Evaporators
• Solvent Recovery Plants
• Pumps and Valves

Nickel Alloy 625

Alloy 625 /Inconel625 demonstrates an excellent combination of corrosion resistance and high strength. Due to the high nickel content, alloy 625 is immune to chloride-induced stress corrosion cracking. It also has good resistance to pitting and crevice corrosion. Resulting from the alloy’s excellent thermal stability, Alloy 625 is the alloy of choice for weld overlay applications in the oil and gas/petrochemical and refineries markets.

Speificaton : ASTM B443/ B444,/B446, AMS 5599/5666/5837/5879/5869/5581

		Cr	Ni	Mo	Co	Cb+Ta	Ti	C	Mn	Si	P	S
MIN		20	-	8.0	-	3.15	-	-	-	-	-	-
MAX		23	Balance	10.0	1.0	4.15	0.4	0.01	0.5	0.35	0.015	0.015

Application:

• Aircraft ducting and exhaust systems
• Engine thrust-reverser systems
• Turbine shroud rings
• Fittings and joints
• Gaskets and damper seals
• Motorsport exhaust system parts
• Weld overlay and spacers for heat recovery systems
• Furnace muffles
• Valve Seats and components

Nickel Machined parts/Fasteners

• Grade: Pure Nickel/Haste alloy Haste alloy C-276, Haste alloy B, Haste alloy C22, Monel 400,
• Specification: DIN/ISO/JIS
• Size: M3-M65 and Custom made
• Application: Aircraft components and Oil & Gas Equipment